Remote Control Receiver/Transmitter with built in Appliance Module (XTM13)

The X10 Home Automation TM13U All House Code RF Radio Receiver with built-in 5 Amp Appliance Module can forward any House Code it receives to all 256 X10 addresses, simply by setting the TM13U's House Code to Position 'P'. The TM13U responds to wireless Radio Frequency commands from X10 Remote Controls and Wireless Sensors or Wall Switches, transmitting the converted signals over the existing house wiring, to awaiting X10 Receivers such as: Appliance Modules and Lamp Modules

FEATURES:
• Wireless X10 Receiver/Transmitter with built-in Appliance Module
• Works with all X10 wireless Remote Controls to remotely turn 'on/off' devices
• Operates on the 433MHz frequency
• Built-in Appliance Module (Address 1), rated at 5amps
• Position 'P' will transmit ALL House Codes
• The built-in Appliance Module can be switched with a command via an X10 Handheld Remote Control or via the mains (using the X-10 protocol)
• When used with the Computer Interface CM11U, the TM13U acts as the "RF Gateway" required by the CM11U interface to initiate macros
• If you have an intelligent controller i.e. HomeVision or a CM12 + Homeseer software, you can poll the TM13U to see whether the built-in Appliance Module is 'on' or 'off'

WHAT'S IN THE BOX:
• TM13U Receiver/Transmitter Unit
• Full operating and installation instructions

IDEAL FOR:
• Operating all your X10 devices from a Remote Control
• Children’s rooms, TV’s, video games
• Remotely controlling appliances in hard to reach places
• Lights, CCTV, security, etc

SPECIFICATION:
Dimensions: 52 x 122 x 33 mm
Supply Voltage: 230V +10% -15 %, 50 Hz
Supply Current: < 20 mA capacitive
RF receiver frequency : 433MHz
X10 powerline: 120 kHz +/- 2 kHz, 3.5 Vpk-pk
Electrical safety: according to EN 60950 EN 60065
CE approved